Wireless App-Controlled Spy Boat

HOW TO CONNECT?
RC boat need to in water to connect
1. Please check the SSID. Put the boat into the water.
2. On your iPod touch, iPhone, or iPad device, go to“Settings” and turn on the Wi-Fi. The SSID address of your boat will appears as an available connection. Note: Each i-Spy Toy has a unique SSID address. If there are multiple boats being used, the individual SSID addresses will appear at the same time. Select your boat's SSID address.
3. Select the boat to confirm the connection. Ensure there is a checkmark to the left of the SSID address and the Wi-Fi connection logo appears at the top of your device's screen.
4. Exit out of the Setting and open the“i-spy toys”.
5. The signal light will blink faster now.
6. When your device screen shows the view from the video camera, you are ready to start exploring.

Please note:
The biggest control radius of the boat is 15 meters, please uses withinthis area, otherwise the boat will be out of control. When the battery is low, the control distance will be reduced
To ensure optimal performance and avoid damage, please use in calm, open waters free of obstacles and debris.

CAUTIONS
1. Rechargeable batteries are only to be charged under adult supervision.
2. The supply terminals are not to be short-circuited.
3. If the i-Spy Toys were damaged, or distorted, please repaired in time.
4. Do not make the i-Spy Toys crash, this may damage the i-Spy Toys.
5. When the battery is low in the i-Spy Toys, the control distance will be reduced.
6. Wipe the boat with a soft, dry cloth, and clean carefully with your fingers or a pair of tweezers. Ensure there is no hair or lint caught between the rear or front wheels and the drive shafts.

WIFI SYSTEM
Download And Install The App, Operate The Camera Boat Through Wifi Connection, And Provide Detailed Instructions In The Manual.
RC Method: Mobile/APP
PACKING LIST
1 x Spy Boat
1 x Instruction Manual